International Site
 |
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cisco Data Center Networking Infrastructure-2 (DCNI-2) is a 4-day hands-on training that teaches you how to implement an enterprise Data Center routing and switching infrastructure with the next-generation Cisco Nexus 7000 and 5000 platforms. The first 3 days will focus on the Nexus 7000, with an overview of the Nexus 5000 and FCoE on Day 4. This course provides a technical overview of the Nexus platform architecture, deployment, and operations, including Virtual Device Contexts, Layer 2 and Layer 3 features, QoS, and security. You will explore the features of NX-OS and the Nexus platform by performing hands-on labs using a Nexus 7000 simulator. Course Contents Module 1: Deploying the Nexus 7000 • Lesson 1: Overview of the Cisco Nexus 7000. • Lesson 2: Introduction to Virtual Device Contexts in the Cisco Nexus 7000 / NX-OS. • Lesson 3: Managing the Cisco Nexus 7000 / NX-OS. • Lesson 4: Nexus 7000 and NX-OS Layer 2 Protocols & Features. • Lesson 5: Nexus 7000 and NX-OS Layer 3 Protocols & Features • Lesson 6: Nexus 7000 Fabric Switching. • Lesson 7: Nexus 7000 / NX-OS Quality of Service. • Lesson 8: Nexus 7000 / NX-OS Security. • Lesson 9: Troubleshooting. Module 2: Overview of the Nexus 5000 • Lesson 1: Overview of the Nexus 5000. • Lesson 2: Implementing an FCoE Network Using Nexus 5000 Switches. • Lesson 3: Understanding Fibre Channel. • Lesson 4: Understanding the FCoE Protocol. Knowledge Prerequisites Recommended: ICND 1 - Interconnecting Cisco Network Devices Part 1 ICND 2 - Interconnecting Cisco Network Devices Part 2 BCMSN - Building Cisco Multilayer Switched Networks BSCI - Building Scalable Cisco Internetworks SND - Securing Cisco Network Devices or ISCW - Implementing Secure Converged Wide Area Networks Course Objective • Describe the key features of the Nexus 7010 chassis. • Describe Supervisor Engine and Line Card Module features. • Describe the key features of the Nexus 7010 power supplies and fan -cooling system. • Describe the Connectivity Management Processor • Describe the basic architecture of NX-OS • Explain NX-OS Process Recovery. • Explain NX-OS Supervisor Redundancy. • Explain how the Nexus 5000 functions within SAN and LAN environments. • Describe the Fibre Channel over Ethernet (FCoE) protocol. DCN2 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
